稀有金屬材料與工程(2012年S1期)
Rare Metal Materials and Engineering

目 錄

• Advanced Surface Engineering Technologies for Remanufacturing Forming
• Modeling and Simulation of Iron-Carbon Phase Transformation During Tempering of Steel
• Robot Off-Line Programming for Thermal Spraying
• Mechanical Behaviors of Ti-Si-N Coatings Deposited by Bias Sputtering
• Nano Sized Copper Selenide Thin Film Pre-Cursor by A Liquid Phase Chemical Growth Process
• On The Role of Preparative Parameters in Growing Nanocrystalline PbS Thin Films by Liquid Phase Chemical Bath Deposition
• Characteristics of Tantalum Surface Treated by 6-Triethoxysilylpropylamino-1,3,5-Triazine-2,4-Dithiol Using XPS
• Surface Characteristics and Indentation Deformation of Porous Anodic TiO_2 Layer Before and After Hot Water Treatment
• On the Optimization of Performance of Hg_xCd_(1-x)S Based Electrochemical Photosensing Cell
• Flame-Retarding Epoxy Resin Films by Curing with Organophosphorus Containing Diamine
• Feasibility Study of Using DLC Coating in Conjunction with Laser Ablation process to Improve the Tribological Performance of an Engineering Surface
• Engineering Design of High Quality GaN Epitaxy on Silicon Substrate Using Varying GaN/AlGaN Composite Buffer Structures
• Cold-Sprayed Magnesium Coatings Deposited with Helium and Air
• Conductive Poly(3-methylthiophene) Thin Films
• Low Temperature Plasma Nitriding of H13 Steel for Improved Surface Hardness
• Effects of Deflection on the Sio_2 Barrier Layer and Mo Back Electrode of Cu(In,Ga)Se_2 Thin-Film Solar Cells on Stainless Steel Substrates
• Application of the Same-Stuff and Equal-Strength Laser Cladding Technology on the Repaired Semishrouded Impeller
• Numerical Simulation of Temperature Field in Nanostructured Al_2O_3-13TiO_2 Feedstock in Supersonic Plasma Spraying
• Mechanical Properties of TiN Coating on Nanocrystalline Surface Layer of 304 Stainless Steel
• Effect of AlN Thickness on Structure and Properties of AlN/Al Dual Protective Coatings on NdFeB by DC Magnetron Sputtering
• Scaling Behaviors of Surface Roughening of Cu Thin Films Deposited by Oblique Angle Deposition
• Microstructure and Wear Resistance of Laser Cladded Co-based Superalloy Coating
• Preparation and Characterization of Co_(0.3)Cr_(0.7)O_x Particles Using for Thermal Radiation Coating
• Experimental Research on 32Cr3Mo1V Substrate AntiMolten Aluminum Corrosion by Laser Treatment
• Al_2O_3/Au Composite Coating on Stainless Steel Prepared by Electro-deposition
• A Method to Prepare Nano-sized Copper Particles and Rods on the Surface of Cu Composite Films
• Phase and Microstructure Properties of Laser Cladding NiAl Intermetallic Compound Coating at Elevated Temperature
• The Characterization of Sputtered Zr-Ge-N Thin Films as Diffusion Barriers Between Copper and Silicon
• Fabrication of the Coatings for the High-temperature Oxidation Resistance on Hydrogen Resistance Steel
• Effect of Heat Source Sliding Contact on the CoPtCr-based Magnetic Recording Disk
• Intrusion Simulation of a C60 Ball into Sliding Contact Space with Graphene Layered Surfaces
• Co Filled Porous Anodic Alumina Film Fabricated on ECR-Al Film with Silicon Substrate
• Corrosion Prevention and Surface Protection for Automobile Design
• Synthesis and Erosion Behaviors of Nanoscale Coatings Prepared by Wire Arc Spraying
• Metallurgy Failure Analysis for an Early Fracture Engine Intake Valve Made of 85Cr18Mo2V
• Remanufacturing Shaping System Based on Pulsed Plasma Arc Welding
• Influence of AAO Treatment Parameters on Characterizations of Surface Pores on 316L Stainless Steel
• Fretting Corrosion Behavior of Zn-Al-Mg-RE Coating under Dry Friction and NaCl Solution
• Research of Electrochemical Noise Technology on Corrosion Resistance
• High Velocity Arc Spraying for Automotive Industry
• Electrodeposition of Copper from Citrate Alkaline Solution Containing Polyethyleneimine(PEI)
• The Structure and Mechanical Properties of Cr4Mo4V Steel Treated by PIII Carbonitriding
• Electron Brush-plating Technique of Cr12MoV Die Steel and Its Wear Resistance
• Characterization of Electroless Ni-P Deposits on Surface of AZ91D Magnesium Alloy
• Effect of Na_2CO_3 on Energy Consumption of Micro-arc Oxidation of Magnesium Alloy
• Strategy to Improve the Performance of Dye-sensitized Solar Cells Based on TiO_2 Films Prepared by Room Temperature Cold Spray
• Characteristics of Fe-based WC Composite Coatings Prepared by Double-pass Plasma Cladding Process
• Investigation on High Power Diode Laser Cladding of Ni-Fe-Cr Based Alloy Coatings
• Wear Properties of Plasma Nitrided H13 Steel at Room and Elevated Temperature
• Study on the Corrosion Properties of Several Kinds of High-temperature Solid Self-lubricating Material
• Preparation and Corrosion Resistance of Silicate Passivation Film Formed on Galvanized Zn Coatings
• Self-propagating High-temperature Synthesis of Al_2O_3-TiB_2 Coatings by Aluminothermic Reactions
• Effect of Aging Temperature on Stress Corrosion Cracking of 17-4 PH Stainless Steel in Wet H_2S Environment
• Influence of Sealing Treatments with Ultrasonic Excitation on Corrosion Resistance of Plasma-sprayed Al_2O_3-13wt%TiO_2 Coatings
• Study on Technology of Aluminizing and Internal Oxidation on Surface of Cu-Al-Y Alloy
• High Temperature Oxidation and Wear Resistance of Y-modified Hot Dipping Aluminized Coating on SCH12 Steel
• Influence of Shot Peening Treatment on the Fatigue and Corrosion Resisting Properties of 2Cr13 Stainless Steel
• Critical Maximum Contact Pressure for Yielding in Hard Coating under Sliding Contact
• Process Optimization for Cerium Oxide Based Conversion Coating of AZ91D Magnesium Alloy at Room Temperature
• Study on Ti/BDD Film Electrode with Ta Interlayer
• Corrosion Electrochemical Behavior of the NiCoCrA1Y/ZrO_2 Coating in Natural Seawater
• Emissivity of La_(1-x)Sr_xMnO_3/acrylic Resin Thermal Control Coating
• XPS Analysis of the Passive Film Formed on 825 Nickel Based Alloy Lined Pipe
• Study on Phosphating by Ultrasonic Wave at Room Temperature for Sintered NdFeB Magnet
• Fabrication of Transparent Superhydrophilic TiO_2 Nanofilm without UV-irradiation
• Properties of Aluminum Oxide (AlO_x) Barrier Coatings Deposited on Poly(Ethylene Terephthalate)(PET)Substrates by Reactive Magnetron Sputtering
• Synthesis of Cr-Al_2O_3 Cermet Selective Surfaces Coated by SnO_2 Thin Film by Air Plasma Spraying
• Experimental Study on Friction Reducing and Anti Wear Property of a Water-Based Lubricant with Polyether Added
• Further Observation on Tin Whisker from Electroplated Sn-Mn Alloy
• Research about the Effect of Ultrasonic Impact on the Fatigue Properties of Cruciform Joints of 16MnR Steel
• Microstructural Characteristics and Heat Transfer of Flattened Millimeter-size Nickel Droplet
• Influence of Plasma Spray Parameters on the Microstructure and Property of ZrO_2-7 wt%Y_2O_3 Coating
• Indentation Size Effect on the Mechanical Properties of Supersonic Plasma Sprayed NiCr-Cr_3C_2 Coating
• Atmospheric Plasma Surface Modification on Stainless Steel Bipolar Plate in PEMFC
• Improvement in the Oxidation Resistance of Tungsten by Sol-Gel Derived Al_2O_3 Coating
• The Electrical Characterization and NIR Absorption of ITO Film under Different Sputtering Time
• The Study on Plasma Boriding of H13 Steel at Low Temperature Assisted by Surface Nanocrystallization Technology
• The Impact of Annealing Temperature on the Optical Performance of Cr-Cr_2O_3 Produced by Plasma Spraying as Solar Energy Selective Absorber Coating
• Influence of TiO_2 Nano Particles on the Resistance to Corrosion and Mechanism of Cr_2O_3
• The Characterization of W-Cu Composite Coating Prepared by Double-Glow Discharge
• Effect of Mesh Resolution on the Particle Deformation during Cold Spraying by Eulerian Formulation
• Microstructure and Tribological Properties of PlasmaSprayed Ni/MoS_2 Solid Lubrication Coating
• Research on Tribological Characteristics and Worn Surface Self-Repairing Performance of Nano Attapulgite Powders Used in Lubricant Oil as Addictive
• Evolution of Nanocrystalline TiBCN Structure with Temperature and Mechanism
• Microstructure and Tribological Properties of TiB_2/TiB/TiN_x(x=1,0.3)/Ti Composite Coating Produced on Pure Ti by Laser Surface Alloying
• Surface Energy and Work of Adhesion of Titanium Oxide Related Materials
• Microstructure and Tribological Behavior of Cr-Cu-N Coatings Deposited by Ion Beam Assisted Magnetron Sputtering
• Study on the Tribological Properties of Graphite-like Amorphous Carbon Film under Different Testing Conditions
• Effect of Ti Incorporation on the Microstructure and Properties of the a-C:H Films Deposited by Magnetron Sputtering Technique
• Effect of Pulse Width and Frequency of Bias DC Voltage on the Microstructure of Pure Cr Coatings by Magnetron Sputter Ion Plating
• Preliminary Study on Cavity Characteristics of Cold Sprayed Thickness Coating
• Substrate Effect on Microstructure and Performance of LTHVOF Sprayed Copper Coatings
• Effects of Binder Phase Content and Substrate Hardness on Deposition Behavior of Cermet Particles in Cold Spraying Process
• Microstructure and Wear Resistance Evolution of HVOFSprayed WC-(W,Cr)_2C-Ni Coating with Post Heat Treatment In Air Atmosphere
• Influence of Deposition Temperature on the Splat Bonding and Mechanical Properties of Plasma-Sprayed Tungsten Coatings
• Progress of Nondestructive Detection Technology on Remanufacturing Coatings
• Alloys Preparation of Ag Particles/Islands on Si Wafer by RF Magnetron Sputtering
• Laser Surface Remelting of Fe-based Alloy Coating Deposited by APS
• Ni/_n-SiO_2 Composite Coating Prepared by Brush Plating with Pulse Current
• Codepositon of Nanodiamonds with Chromium(Ⅲ)
• Research on Properties of Carbon Fiber/Epoxy Resin Composite Material by Microwave Curing
• Effects of Al Content on Microstructure and Mechanical Property of CrAlN Coating Synthesized by Reactive Magnetron Sputtering
• Working Pressure Induced Microstructure and Stress Evolution of Sputtered ZrN Coatings
• Application of Plasma Enhanced Chemical Vapor Deposition for Fingerprint Resistance
• Preparation of Al-based Amorphous/Nanocrystalline Composite Coating on Mg-based Alloys Precipitated by Arc Spraying Process
• Effect of Applied Stresses on the Microstructure and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings
• Influence of Atmospheric Plasma-Sprayed Composite Cathode on the Performance of Solid Oxide Fuel Cells
• Silt Erosion Characteristics of a Cr_3C_2-NiCr Coating Fabricated by High Velocity Oxy-Fuel (HVOF) Thermal Spray
• Hot Corrosion Behavior of a High Velocity Arc-Sprayed Fe-Cr-B-C Coating
• Microstructure Characteristics of SiC Particle-Reinforced Aluminum Matrix Composites Coatings by Cold Spraying
• Preparation of Flexible Pt Counter Electrode on Indium-doped Tin Oxide Coated Polyethylene Naphthalate for Dye-sensitized Solar Cells
• Formation of Iron-aluminide Coating through Annealing of Shrouded Plasma-sprayed Iron/Aluminum Composite
• Study on the Technology of Ni-P Electroless Plating on the Mg Alloy
• Tempering Behavior of M50 Steel with Different Austenite Proportion Induced by High Current Pulsed Electron Beam
• Hydroxyapatite Growth on Ti MAO Surface Assisted by the Addition of Calcium and Phosphate Ions in Hydrothermal Treatment Solution
• Tribological Performance of TiB_2-Ni Composite Coating Deposited by APS