中國科學:技術科學(2010年04期)
Scientia Sinica Technologica

目 錄

• 征稿簡則
• 黃河下游河道場次洪水排沙比及其不確定性
• 三峽水庫172.5m蓄水過程對香溪河庫灣水體富營養化的影響
• 矩形液池中熱毛細對流起振過程的數值模擬
• 二氧化碳埋存對地層巖石影響的室內研究
• 燃煤飛灰吸附脫汞能力的實驗研究
• 射流頻率對轉子失速裕度影響的探索
• 基于基排序法的冗余操縱面控制分配與管理
• 新型SINP硅藍紫光電池的研究
• 肖特基接觸單層有機太陽能電池的短路電流的數值研究
• 回復“對‘輻射熱力學的新進展——輻射有效能光量子等效溫度 光量子熵常數’一文的討論”
• One-step synthesis route of the aligned and non-aligned single crystalline α-Si_3N_4 nanowires
• Deep levels,transport and THz emission properties of SiGe/Si quantum-well structures
• Inducing effect of Pb(Zr_(0.4)Ti_(0.6))O_3 thin film derived by different processes in BiFeO_3/Pb(Zr_(0.4)Ti_(0.6))O_3 multilayer capacitor at room temperature
• Energy spectrum of an electron confined in the hexagon-shaped quantum well
• Effect of Cu seed on the synthesis and characterization of FeCo alloy nano-particles by using polyol method
• Comparison of short period InAs/GaSb superlattices on GaSb and GaAs substrates
• Low temperature synthesis of SiCN nanostructures
• Straight SiO_x nanorod Y junctions
• Effects of Ti,Al and Hf on niobium silcides formation in the Nb-Si in situ composites
• Improvement of warm formability of Al-Mg sheet alloys containing coarse second-phase particles
• Light metal compound casting
• An electrochemical and microstructural characterization of steel-mortar admixed with corrosion inhibitors
• Effect of one-step aging on microstructure and properties of a novel Al-Zn-Mg-Cu-Zr alloy
• The Young‘s moduli prediction of random distributed short-fiber-reinforced polypropylene foams using finite element method
• A combinatorial approach of developing alloy thin films using co-sputtering technique for displays
• Optimization of the process for preparing Al-doped ZnO thin films by sol-gel method
• Highly efficient stacked organic light-emitting devices employing a novel intermediate layer
• Investigations of ZnO thin films deposited by a reactive pulsed laser ablation
• Switchable hydrophobic-hydrophilic layer obtained onto porous alumina by plasma-enhanced fluorination
• Novel wide band gap alloyed semiconductors,x(LiGaO_2)_(1/2)-(1-x)ZnO,and fabrication of their thin films
• Dielectric tunable properties of BaTi_4O_9-doped Ba_(0.6)Sr_(0.4)TiO_3 microwave composite ceramics
• Ferroelectric relaxor as a critical state
• Dielectric properties of BST/MZO ceramic composites
• Preparation and properties of multi-wall carbon nanotube/SiC composites by aqueous tape casting
• Preparation of TiO_2 thin film by the LPD method on functionalized organic self-assembled monolayers
• Modeling large reversible electric-field-induced strain in ferroelectric materials using 90° orientation switching
• Recycling of magnesium drive train components
• An improved neural network model for prediction of mechanical properties of magnesium alloys
• Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature
• Superplasticity of Mg-5.8Zn-1Y-Zr alloy sheet fabricated by combination of extrusion and hot-rolling processes
• Understanding of the influence of process parameters on the heat transfer behavior at the metal/die interface in high pressure die casting process
• Examination of dynamic recrystallization during compression of AZ31 magnesium
• Effects of electromagnetic field and lubricate condition on the surface quality of magnesium alloy billet during LFEC processing
• Microstructure and texture evolution during warm compression of the magnesium alloy AZ31
• Synthesis of brookite-typed titania from titanium chloride solution
• Effect of the silicon powder content on the properties of Al_2O_3-SiC-Me composites
• Performance of an activated carbon made from waste palm shell in simultaneous adsorption of SO_x and NO_x of flue gas at low temperature
• Process optimization of reaction of acid leaching residue of asbestos tailing and sodium hydroxide aqueous solution
• Preparation and characterization of carbon pillared clay material
• Characterization and normalization factors of abiotic resource depletion for life cycle impact assessment in China
• Sorption of Pb(Ⅱ) from aqueous solution by konjac glucomannan beads
• Microwave absorbing properties and magnetic properties of different carbon nanotubes
• Introduction of fluorin into PBO polymer chains:Toward higher thermal stability and lower dielectric constant
• Net-shape forming of composite packages with high thermal conductivity
• Effects of particle size on the mechanical properties of particle-reinforced Sn-Ag composite solder joint
• Light emission of double-walled carbon nanotube filaments doped with yttrium and europium
• Effects of Si and Ce on the microstructure and hydrogen storage property of Ti_(26.5)Cr_(20)V_(45)Fe_(8.5)Ce_(0.5) alloy
• Fabrication and its characteristics of low-temperature polycrystalline silicon thin films
• Effect of Fe(Ⅲ) impurity on the electrochemical performance of LiFePO_4 prepared by hydrothermal process
• Cu_2ZnSnS_4 thin films prepared by sulfurizing different multilayer metal precursors